Windows 7 New HP and home wireless connection

It seems like you are experiencing connectivity issues with your new HP Pavilion 3128ca laptop when trying to connect to your home wireless router, a Linksys G 2.4 GHz, due to a password length issue. If your old devices can connect with the same password without any problems, there may be a specific compatibility or configuration issue with the new laptop. Here are a few steps you can take to troubleshoot and resolve this problem: 1. Check Wireless Security Settings: - Log in to your router's administration interface from a device that's already connected. - Verify the wireless security settings. Make sure you're using the correct security protocol (e.g., WPA2) and password type (e.g., ASCII or hexadecimal). 2. Update Network Adapter Drivers: - Ensure that the network adapter drivers on your new HP Pavilion are up to date. Outdated drivers can sometimes cause connectivity issues. 3. Forget Network and Reconnect: - On your new laptop, forget the wireless network and try reconnecting. - Go to the Wi-Fi settings, find your network, and select "Forget" or "Remove." - Reconnect to the network and re-enter the password. 4. Use ASCII Characters for Password: - If you are using a special character in your password, try using only ASCII characters (letters and numbers) to see if that resolves the issue. 5. Restart Router and Laptop: - Sometimes, a simple restart of both your router and the new laptop can resolve connectivity issues. 6. Adjust Wireless Security Settings: - If all else fails, you can try adjusting the security settings on your router as a temporary measure. However, this should be done with caution for security reasons. If you've tried these steps and are still unable to connect, it might be beneficial to reach out to HP support for further assistance. They may have specific troubleshooting steps for your HP Pavilion model. Feel free to try these steps, and let me know if you need further assistance or if you have any other questions!