Hi,
I just purchased a new HDTV & connected it to my desktop w/ a HDMI cable ( the connection is via a splitter, one input to monitor the other to the TV ). Everything seems to be working but when I look @ playback devices it shows the TV that was previously connected as the one currently...
audio
cable
compatibility
configuration
connection
desktop
devices
graphics
hdmi
hdtv
monitor
new device
settings
splitter
support
tech help
troubleshooting
video
video playback
Greetings,
I have recently bought Microsoft Wireless Display Adapter and am unable to sync it with my hdtv. I plugged in the adapter and powered it through a USB extension but when I add a wireless display, it says "No devices found". My computer is unable to pair with the display adapter and it...
Hi
I was wondering whether anyone could tell me why this happens?
I have a 1080i HD TV set, with a resolution of 1920 by 1080, and a 27" monitor with the same resolution.
I do see that inspite of the fact that both are the same pixel dimensions they are not the same aspect ratio.
I'm aware...
I have a flat screen monitor that is connected via the DVI port. I also have an HDTV, where my computer connects to it via an HDMI cable. I notice they can't work simultaneously.
is there a software solution to be able to switch between the 2, perhaps by disabling something?
thanks
When I connect my HDTV to the laptop with an HDMI cable nothing shows on the TV, even when the TV is selected in Catalyst control panel. If I restart the laptop the TV will show what the Laptop screen shows until the laptop reaches the windows start screen then it goes blank. I would like to use...
acer
amd
bios
catalyst
display
drivers
graphics
hardware configuration
hdmi
hdtv
laptop
media center
memory
pro
screen
system information
troubleshooting
video output
virtualization
windows 8
There's also all sorts of things in the Catalyst Control Center that I don't know if they should be checked off or not, such as "Enable GPU scaling, Enable ITC processing". Never heard of such things, but they were off at default so I'm leaving it that way for now.
What is the different between...
setup
ATi 6870 --DVI out to main monitor
HDMI out to AV receiver then HDTV
Ok my main monitor is set to main display but is being identify as 2 by windows 8 when up and running.
If my AV amp and hdtv off then turn on my pc on my main monitor the screen is blank (no signal) ill have to...
Hello, hoping someone can help me with this slight issue.
For the last few years I've used a laptop display and always been satisfied with the display but my laptop has decided to completely destroy itself, so I am using my old desktop PC. I don't have a monitor so at first was using it on a 32...
Greetings!
A little problem regarding hooking an Asus EEE netbook up to a Haier HDTV/monitor via VGA.
Last night, I hooked it up and all went well. My control panel showed me a wide range of resolutions that allowed me to view my entire screen and use the monitor without any problem.
Today...
So I just got a brand new computer and hooked it up to my HDTV but the sides of my screen are cut off. I need help finding out how to fix this.
Here's a pic:
Link Removed
I have a Samsung Syncmaster P2770HD 27 inch 1080P LCD HDTV/Monitor, I currently have it hookup to a DVI to DVI connection to my video card. Is there really big difference if I hook it up dvi (from Card) to HDMI connection on monitor. I would have purchase a DVI to HDMI cable. This why I am...
We didn't think much of Haier's mention in Microsoft's Windows 7 Media Center embedded press release, but on the show floor today we ran across this HDTV which was actually a full-blown Media Center including tuners and a harddrive. The details were very skimpy beyond that, with no mention of...
Hope this is the right forum, if not my apologies,
I'm looking on some advice on which TV cards are compatible with Windows 7 Media Centre. I'm based in the UK and have available either Freesat or Freeview.
I've looked at several and although they claim compatability with Vista I can't find...
I purchased Windows 7 in three forms an ISO, 7 Professional and Ultimate. I tryed to install all three on an HP Media center. None of these would install.. it would set up to the point of restart and then nothing but a blank screen. In the past three weeks as I tryed each of these options I...
blank screen
computer
display
hard drive
hdtv
home office
hp media center
installation
iso
media center
microsoft
monitor
professional
support
technical issues
troubleshooting
ultimate
user experience
video input
windows 7
Hello,
recently i have bought cable audio which looks liks this:
i connect this from my sound card to my tv but there is no sound at all.
im using WIN7 and HDTV connection,how can i force my tv to make sound?
hi everyone,
i purchased a pinnacle pctv hd mini stick for my HP pavillion p6214y desktop. i have tried to install the program and driver about 10 times but my pc still doesn't recognize the usb tuner. it give me the following error "no driver found for hdtv 80e". i looked at the...
Oh my what a huge pain in the butt. I installed Windows 7 clean on my Gateway p7805u. It has a gforce 9800m GTS. When I connect to my HDTV it says "Plugged in" and I do see the Display fine. The weird part, no audio. I've tried everything, installing new drivers, custom drivers, etc...
FIXED FIXED FIXED FIXED FIXED
------------------------------------
------------------------------------
Scroll to bottom for fix info.......
------------------------------------
------------------------------------
Hi all, first post here. Seems like a forum I should be signed up to as I've...
connection
cpu spikes
divx
error
file transfer
firewall
folders
hdtv
input
media
network
optimization
performance
router
slow
streaming
web browsing
windows 7
wmc
xbox 360
Radeon 4600 series with latest drivers and catalyst.
Since this is a fairly new card with drivers for Windows 7 I cannot get the HDMI to work or for that fact a connection to the HDTV using HDMI. When I connect the HDMI Windows 7 goes to a black screen. I was thinking maybe I have to disable...
I have been using my HDTV as a secondary display, in Windows XP it worked fine, used a resolution of 1360x768. My problem is the only resolutions available in 7 are 800x600 and 1024x768. Its connected via VGA. I have the lastest drivers for my video card installed. There are not any display...