Windows 10 BSOD Unexpected_Store_Exception need help to fix

[Vodalyn1984]

I keep getting the same crash report, an Unexpected_Store_Exception, on boot up. Any help would be greatly appreciated!

 

[kemical]

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 154, {ffffe000bf4cb000, ffffd0002528eae0, 0, 0}

Probably caused by : ntkrnlmp.exe ( nt!SMKM_STORE<SM_TRAITS>::SmStUnhandledExceptionFilter+22 )

Followup: MachineOwner

Hi,
all dump files were the same as the above and mean that the Store caught an unexpected exception which looking at the call stack could down to a Hard drive/NTFS issue.
I checked your support page for drivers and have to admit this is a first for me:

I'm pretty sure the above is your machine but please correct me if I'm wrong.

May I ask when you upgraded to windows 10 did you check on compatibility first?

In any case please run these scans:
File scans
Right click on the Start menu icon and from the revealed list choose 'admin command prompt'. Type:
sfc /scannow
press enter and await results

In the same command prompt and after the above scan has finished type:
dism /online /cleanup-image /restorehealth
Press enter and await results (longer this time).

If the first scan found files it could not repair but the second scan is successful, run the first scan again using the same command prompt box and this time it should repair the files found.

Please run a chkdsk:
The How-To Geek Guide to Using Check Disk in Windows 7, 8, or 10

Post any new dump files.

 

[Vodalyn1984]

I have followed all the instructions above, to answer your questions Yes that is my computer and I upgraded to Windows 10 about a year ago, I don't remember the exact date. Here is the updated report.

 

[kemical]

I have followed all the instructions above

What were the results from the scans?

 

[kemical]

May I ask when you upgraded to windows 10 did you check on compatibility first

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 154, {ffffe00016b3c000, ffffd001b3e76d80, 0, 0}

Probably caused by : ntkrnlmp.exe ( nt!SMKM_STORE<SM_TRAITS>::SmStUnhandledExceptionFilter+22 )

Followup: MachineOwner

Please create a Recovery disk/USB:
https://support.microsoft.com/en-us...3a5-a286-9e98f886d490/create-a-recovery-drive

The reason for this is because I want you to run the driver verifier. This can sometimes lead to a bsod boot loop. If this happens you can boot from the recovery disk/USB and enter safe mode to turn the verifier off.:
How do I fix a Blue Screen in Windows using Driver Verifier?

 

[Vodalyn1984]

All of the scans came back clean, no errors at all.

 

[kemical]

All of the scans came back clean, no errors at all.

Ok thank you, please run the verifier as specified above.