Hi there
I created an account so I could post something similar. I realise this is an ancient thread but in the spirit of trying to keep relevant things in the same place I hope you don't mind me resurrecting this from the dead. I have my screen saver set to activate after ten minutes and my monitors to turn off after twenty minutes. Up until quite recently both of these things have happened perfectly. Admittedly, I have changed my graphics card from an ATI to a Geforce card a couple of weeks back but this issue predates that by a few weeks.
I have followed the steps outlined in this thread to no avail. The below cut-n-paste is from the energy-report.html that was generated after the powercfg -energy command was run.
I might add that I have a number of SSDs and so I have disabled the sleep function of those, hence the first two results indicating as such.
However, the SSDs never prevented my screen saver from activating or my monitors from turning off before.
I have heard that keyboard and/or mouse (Logitech G19 and Logitech G700s) could stop the screen saver from functioning but I have tried to isolate that as a possible cause by unticking the 'allow device to wake computer' function for each one in turn. It doesn't help. Anyway, I have had those devices for a while and they never stopped the screen saver activating before.
Please let me know if you have any other questions or require any more info. I've tried other things too over the last couple of weeks but my aged and addled brain has made me forget what they were.
Any help really gratefully received please.
___________________________________________________
Power Policy:Sleep timeout is disabled (Plugged In)
The computer is not configured to automatically sleep after a period of inactivity.
Power Policy
isk idle is disabled (Plugged In)
The disk is not configured to turn off after a period of disk inactivity.
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Root Hub
Host Controller ID PCI\VEN_8086&DEV_1D2D
Host Controller Location PCI bus 0, device 26, function 0
Device ID USB\VID_8086&PID_1D2D
Port Path
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Root Hub
Host Controller ID PCI\VEN_8086&DEV_1D26
Host Controller Location PCI bus 0, device 29, function 0
Device ID USB\VID_8086&PID_1D26
Port Path
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name Generic USB Hub
Host Controller ID PCI\VEN_8086&DEV_1D2D
Host Controller Location PCI bus 0, device 26, function 0
Device ID USB\VID_8087&PID_0024
Port Path 1
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name Generic USB Hub
Host Controller ID PCI\VEN_8086&DEV_1D26
Host Controller Location PCI bus 0, device 29, function 0
Device ID USB\VID_8087&PID_0024
Port Path 1
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name Generic USB Hub
Host Controller ID PCI\VEN_8086&DEV_1D2D
Host Controller Location PCI bus 0, device 26, function 0
Device ID USB\VID_05E3&PID_0607
Port Path 1,5
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Mass Storage Device
Host Controller ID PCI\VEN_8086&DEV_1D26
Host Controller Location PCI bus 0, device 29, function 0
Device ID USB\VID_040D&PID_6205
Port Path 1,1
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Composite Device
Host Controller ID PCI\VEN_8086&DEV_1D26
Host Controller Location PCI bus 0, device 29, function 0
Device ID USB\VID_046D&PID_C531
Port Path 1,3
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Composite Device
Host Controller ID PCI\VEN_8086&DEV_1D2D
Host Controller Location PCI bus 0, device 26, function 0
Device ID USB\VID_046D&PID_C228
Port Path 1,5,1
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Composite Device
Host Controller ID PCI\VEN_8086&DEV_1D2D
Host Controller Location PCI bus 0, device 26, function 0
Device ID USB\VID_046D&PID_C229
Port Path 1,5,2
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Composite Device
Host Controller ID PCI\VEN_8086&DEV_1D2D
Host Controller Location PCI bus 0, device 26, function 0
Device ID USB\VID_046D&PID_C07C
Port Path 1,6