Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck C4, {2000, fffff80148b2114f, 0, 5254454b}
*** WARNING: Unable to verify timestamp for rt640x64.sys
*** ERROR: Module load completed but symbols could not be loaded for rt640x64.sys
Probably caused by : rt640x64.sys ( rt640x64+114f )
Followup: MachineOwner
Hi,
the verifier did indeed do it's job and the driver in question is Realtek NICDRV 8169 PCIe GBE Family Controller driver. This is the driver you downloaded from the support site yes? If so this has me a little confused as this driver isn't for the chip installed on your motherboard. You have a RTL8111E chip which you can see under 'Lan' in your specifications:
GIGABYTE - Motherboard - Socket AM3+ - GA-970A-UD3 (rev. 1.0/1.1) Ok now make sure you have a copy of the lan driver found on the Gigabyte support page saved somewhere as you might need it later.
Now download the version which should be for your chip here:
Realtek (second download down)
Once you've downloaded the driver uninstall the original that's on the system and then try the new driver you just downloaded. If for whatever reason it doesn't work use the driver from the support page you saved earlier.
Let me know how you get on and post any new dump files.