Windows 7 This is not funny

all drives checked Ok
files attached thanks

Besides the 0x24 stop error, all crash dumps are 0xC2 stops.


Let's look at your drivers that need updates:

This can be updated by visiting the following link. Please let the MSI scanner show you all the newest drivers it has for you and allow it to update them. The above driver belongs to a utility for the motherboard and should be updated by doing this:

MSI Global ? Computer, Laptop, Notebook, Desktop, Mainboard, Graphics and more


------

This RAID driver is far too old and needs to be updated. You can do this one manually to especially make sure it is updated, after doing the above scan/installation:


Here's the update:

MSI Global ? Computer, Laptop, Notebook, Desktop, Mainboard, Graphics and more

-----

This Asus Video Capture driver needs updating for whichever hardware you have that captures video:


Visit the specific site for the hardware to obtain latest driver.


-------


Your Realtek lan driver is not too old but there is a nice update for it:


Link Removed


-----

Same for your Realtek HD audio driver. Not too old but again, a nice update:

MSI Global ? Computer, Laptop, Notebook, Desktop, Mainboard, Graphics and more


----


After you do these things, you're not going to have further problem I believe.

Please let us know how it goes and post a new crash dump if it becomes necessary. Good luck and enjoy.

Many thanks for the info
updates
MSI Mother boards and vga drivers could not find any that were later than mine
IChior Raid came up this Computer not minimum require ment to load
I have taken out the video card cpature driver as i dont use it anyway these days
will keep you posted if it crashes again


I think the main one could be the raid driver as it realy for xp
I have searcch everywhere and this one is what some other guys use in vista

question could this cause the problem
I use a ata driver thats booted before w7 ITE 8212 raid
I noticed there is another ata installed intel ICh10 family
I think its loaded from the bios or a program
what do you think

Can't say for sure. If you're still having bsod, post a new crash dump and we can look at the current driver situation on the machine.

not at this stage
but how can I unistall the other ata driver .
as it not being used anyway

Glad to hear it then.

If you aren't having any problem, I'd suggest leaving things be as is. One driver is probably needed for the SATA ports and the other driver is necessary for IDE port(s).

thats could be thanks will sit and see
again thanks

one other I have a 1tb HD split in two one side has programs w7 32
I was trying to install w 7 64 on the other part of the hard drive its marked active < i think thats the problem
the installaion goes to the selection of the drive and when I hit it and ask for the install it shows it cant find the partition
I can format it within the installation and that makes no difference
any solutions

Crash dump directory: E:\Windows\Minidump

Crash dumps are enabled on your computer.


[FONT=Segoe UI, Arial]On Wed 7/07/2010 2:09:06 AM your computer crashed
This was likely caused by the following module: [FONT=Segoe UI, Arial]ntkrnlpa.exe[/FONT]
Bugcheck code: 0x1A (0x41790, 0xC0802072, 0xFFFF, 0x0)
Error: [FONT=Segoe UI, Arial]MEMORY_MANAGEMENT[/FONT]
Dump file: E:\Windows\Minidump\070710-20890-01.dmp
[/FONT][FONT=Segoe UI, Arial]file path: E:\Windows\system32\ntkrnlpa.exe
product: [FONT=Segoe UI, Arial]Microsoft® Windows® Operating System[/FONT]
company: [FONT=Segoe UI, Arial]Microsoft Corporation[/FONT]
description: NT Kernel & System
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit is in another driver on your system which cannot be identified at this time.
[/FONT][FONT=Segoe UI, Arial]
again [/FONT]

also from time to time programs want to close for no reason then open again
internet explorer and explorer do it most times.