Windows 7 This is not funny

3doz

Senior Member
On Thu 1/07/2010 1:14:49 AM your computer crashed
This was likely caused by the following module: ntfs.sys

Bugcheck code: 0x24 (0x1904FB, 0x8D627A48, 0x8D627620, 0x83067627)
Error: NTFS_FILE_SYSTEM

Dump file: E:\Windows\Minidump\070110-24984-01.dmp
file path: E:\Windows\system32\drivers\ntfs.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT File System Driver
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit is in another driver on your system which cannot be identified at this time.



[FONT=Segoe UI, Arial]On Tue 29/06/2010 11:12:12 PM your computer crashed
This was likely caused by the following module: [FONT=Segoe UI, Arial]ntkrnlpa.exe[/FONT]
Bugcheck code: 0xC2 (0x99, 0xB5447050, 0x0, 0x0)
Error: [FONT=Segoe UI, Arial]BAD_POOL_CALLER[/FONT]
Dump file: E:\Windows\Minidump\062910-21359-01.dmp
[/FONT][FONT=Segoe UI, Arial]file path: E:\Windows\system32\ntkrnlpa.exe
product: [FONT=Segoe UI, Arial]Microsoft® Windows® Operating System[/FONT]
company: [FONT=Segoe UI, Arial]Microsoft Corporation[/FONT]
description: NT Kernel & System
The crash took place in a standard Microsoft module. Your system configuration may be incorrect,
[/FONT]

[FONT=Segoe UI, Arial]On Sat 26/06/2010 11:39:20 PM your computer crashed
This was likely caused by the following module: [FONT=Segoe UI, Arial]win32k.sys[/FONT]
Bugcheck code: 0x1000008E (0xC000001D, 0x997D26B9, 0x986A16D0, 0x0)
Error: [FONT=Segoe UI, Arial]KERNEL_MODE_EXCEPTION_NOT_HANDLED_M[/FONT]
Dump file: E:\Windows\Minidump\062610-19906-01.dmp
[/FONT][FONT=Segoe UI, Arial]file path: E:\Windows\system32\win32k.sys
product: [FONT=Segoe UI, Arial]Microsoft® Windows® Operating System[/FONT]
company: [FONT=Segoe UI, Arial]Microsoft Corporation[/FONT]
description: Multi-User Win32 Driver
The crash took place in a standard Microsoft module. Your system configuration may be incorrect,
[/FONT][FONT=Segoe UI, Arial]
[/FONT]

[FONT=Segoe UI, Arial]On Thu 24/06/2010 1:13:58 PM your computer crashed
This was likely caused by the following module: [FONT=Segoe UI, Arial]ntkrnlpa.exe[/FONT]
Bugcheck code: 0xFFFFFFFFC0000221 (0x9130E1D8, 0x0, 0x0, 0x0)
Error: [FONT=Segoe UI, Arial]STATUS_IMAGE_CHECKSUM_MISMATCH[/FONT]
Dump file: E:\Windows\Minidump\062410-22218-01.dmp
[/FONT][FONT=Segoe UI, Arial]file path: E:\Windows\system32\ntkrnlpa.exe
product: [FONT=Segoe UI, Arial]Microsoft® Windows® Operating System[/FONT]
company: [FONT=Segoe UI, Arial]Microsoft Corporation[/FONT]
description: NT Kernel & System
The crash took place in a standard Microsoft module. Your system configuration may be incorrect,
[/FONT]


cpu i7 930
6 gb ram
mb msi x58 pro
gtx260 video

any suggestion please


 
Hi,

Please go to C:\Windows\Minidump to copy the files in there to any other folder. Then rar or zip the files. Attach the rar to zip to a post using the paperclip above where you type, in advanced mode reply.

We shall have a look.

I can tell you right now that the 0x24 error is related to the hard drive. Please open an elevated command prompt. Then run this command for each partition on the system, changing C: to match the letter each time:

Code:
chkdsk /r C:
 
Besides the 0x24 stop error, all crash dumps are 0xC2 stops.

Code:
BAD_POOL_CALLER (c2)
The current thread is making a bad pool request.  Typically this is at a bad IRQL level or double freeing the same allocation, etc.
Arguments:
Arg1: 00000099, Attempt to free pool with invalid address  (or corruption in pool header)
Arg2: b5447050, Address being freed
Arg3: 00000000, 0
Arg4: 00000000, 0

Debugging Details:
------------------

Let's look at your drivers that need updates:
Code:
ATKDispLowFilter ATKDispLowFilter.sys Tue May 13 23:02:50 2008

This can be updated by visiting the following link. Please let the MSI scanner show you all the newest drivers it has for you and allow it to update them. The above driver belongs to a utility for the motherboard and should be updated by doing this:

MSI Global ? Computer, Laptop, Notebook, Desktop, Mainboard, Graphics and more


------

This RAID driver is far too old and needs to be updated. You can do this one manually to especially make sure it is updated, after doing the above scan/installation:

Code:
iteraid  iteraid.sys  Wed Feb 25 03:46:38 2004

Here's the update:

MSI Global ? Computer, Laptop, Notebook, Desktop, Mainboard, Graphics and more

-----

This Asus Video Capture driver needs updating for whichever hardware you have that captures video:

Code:
asusgsb  asusgsb.sys  Thu Sep 27 09:14:15 2007

Visit the specific site for the hardware to obtain latest driver.


-------


Your Realtek lan driver is not too old but there is a nice update for it:

Code:
Rt86win7 Rt86win7.sys Fri Nov 27 04:44:53 2009

MSI Global ? Computer, Laptop, Notebook, Desktop, Mainboard, Graphics and more


-----

Same for your Realtek HD audio driver. Not too old but again, a nice update:

MSI Global ? Computer, Laptop, Notebook, Desktop, Mainboard, Graphics and more


----


After you do these things, you're not going to have further problem I believe.

Please let us know how it goes and post a new crash dump if it becomes necessary. Good luck and enjoy.
 
Many thanks for the info
updates
MSI Mother boards and vga drivers could not find any that were later than mine
IChior Raid came up this Computer not minimum require ment to load
I have taken out the video card cpature driver as i dont use it anyway these days
will keep you posted if it crashes again


I think the main one could be the raid driver as it realy for xp
I have searcch everywhere and this one is what some other guys use in vista
 
question could this cause the problem
I use a ata driver thats booted before w7 ITE 8212 raid
I noticed there is another ata installed intel ICh10 family
I think its loaded from the bios or a program
what do you think
 
Can't say for sure. If you're still having bsod, post a new crash dump and we can look at the current driver situation on the machine.
 
not at this stage
but how can I unistall the other ata driver .
as it not being used anyway
 
Glad to hear it then. :)

If you aren't having any problem, I'd suggest leaving things be as is. One driver is probably needed for the SATA ports and the other driver is necessary for IDE port(s).
 
one other I have a 1tb HD split in two one side has programs w7 32
I was trying to install w 7 64 on the other part of the hard drive its marked active < i think thats the problem
the installaion goes to the selection of the drive and when I hit it and ask for the install it shows it cant find the partition
I can format it within the installation and that makes no difference
any solutions
 
Crash dump directory: E:\Windows\Minidump

Crash dumps are enabled on your computer.


[FONT=Segoe UI, Arial]On Wed 7/07/2010 2:09:06 AM your computer crashed
This was likely caused by the following module: [FONT=Segoe UI, Arial]ntkrnlpa.exe[/FONT]
Bugcheck code: 0x1A (0x41790, 0xC0802072, 0xFFFF, 0x0)
Error: [FONT=Segoe UI, Arial]MEMORY_MANAGEMENT[/FONT]
Dump file: E:\Windows\Minidump\070710-20890-01.dmp
[/FONT][FONT=Segoe UI, Arial]file path: E:\Windows\system32\ntkrnlpa.exe
product: [FONT=Segoe UI, Arial]Microsoft® Windows® Operating System[/FONT]
company: [FONT=Segoe UI, Arial]Microsoft Corporation[/FONT]
description: NT Kernel & System
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit is in another driver on your system which cannot be identified at this time.
[/FONT][FONT=Segoe UI, Arial]
again
[/FONT]

also from time to time programs want to close for no reason then open again
internet explorer and explorer do it most times.
 
Back
Top