Windows Vista Vista RC1 Locks Up!!!!

M

mufaddal

New Member
Joined
Sep 13, 2006
Messages
2
Hi,

I am facing a wierd issue on my just installed Vista RC1. At times the system just locks up and all i can do is restart the computer. The curor does not move and the hard drive stops responding. I have tried installing Vista RC1 onto two diff hard drives but with same results.

My system specs are:-

P4 3Ghz HT
Intel D101ggc
512MB ddr 400 MHz RAM
Nvidia 7300GS card
Seagate 160 GB and 20 GB hard drives

I did not face this issue on previous builds of Vista and my Win XP on another partition runs just fine. What i think is one of the critical device drivers of Vista either has a compatibilty problem or it just stos responding.

Any help in this regard is appreciated. I feel others might be facing an issue similar to this and that Microsoft needs to take care of this. Last words i guess Vista is still NOT ready.

Thank you
 
Solution
B
I was getting a similar problem under the MSDN RTM build, but it disappeared after downloading Intel chipset drivers. Your motherboard may or may not need this but its worth looking into. If worse comes to worse start disabling drivers for devices you are not using in Device Manager see if this clears things up.
Sort by date Sort by votes
Same problem here. I am testing Windows Vista RC1, and I tested Beta 2 too. In the two builds, I have the same major problem while working in Windows: unexpectedly, without doing anything special, the screen freezes completely, and I have to reset power. As far as I know, it doesn't create any report/log/debug to send. When I restart Vista, it reports some corrupted files (normally apps that I was running, shortcuts or folders). ScanDisk can't correct most of that errors, leading me to reformat the partition where Vista is installed.
The last time that happened was while I was copying a file from one HD to another. I have no problems installing Vista, and I have no performance problems while using it. I have no problem using XP too (XP is installed in a separate hard drive).
Maybe it's an old critical driver causing the conflict? Can you help me finding the cause of the problem?
Thanks for the attention, and sorry for any gramatical errors

3,2GHz P4 with HT
448MB RAM (512MB - 64MB shared memory)
ATI Radeon Xpress 200 Series 64MB graphics card
Hard drive 1: 80GB (Windows XP)
Hard Drive 2: 80GB (Vista installed in a 20GB partition)
 
Upvote 0 Downvote
Vista freezes

I have a similar issue. Vista freezes for a few minutes, then acts as if nothing happened. I am getting a DLLHost.exe stop message in the Reliability and Performance Monitor. I have had Perfmon running when it happens and not even a blip in any of the counters. My version of Vista is Ultimate (6.0.6000). My computer specs:

CPU: P4 3.2 ghz "640"
RAM: 2 gb DDR2 667
Video: Vision Tek X1300XT PCIe 256 mg
Drive0: SATA 200 gb
Drive1: SATA 80 gb
DVD0: Sony DVD
DVD1: Memorex DVD Burner 16x Dual Layer
MB: ECS RS400-A

Any ideas?

Thanks,

Tom
 
Upvote 0 Downvote
I was getting a similar problem under the MSDN RTM build, but it disappeared after downloading Intel chipset drivers. Your motherboard may or may not need this but its worth looking into. If worse comes to worse start disabling drivers for devices you are not using in Device Manager see if this clears things up.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

Similar threads

R
  • Solved
Windows 10 system locks up
Replies
1
Views
3K
BIGBEARJEDI
S
  • Solved
Windows 7 Strange Lock Up, no BSOD, not immediate
Replies
1
Views
1K
ChatGPT
  • Question Question
Windows 7 Re: PC locks up when copying files
Replies
1
Views
2K
nmsuk
P
  • Solved
Windows 7 Windows locks up after PSU failure
Replies
1
Views
3K
Saltgrass
  • Solved
Windows 7 Win 7 + Rosetta Stone V4 (Version 4 TotalE) Locks up computer
Replies
6
Views
28K
tomhudzik
T