ide

I have a Intel D101GCC Motherboard 3.0 G Hz processor 2 GB DDR RAM with 80 GB IDE/PATA Hard drive and a 500 GB SATA Hard Drive. Currently running XP I tried to intsll a fresh VISTA. whenever i try do a fresh intsallation the DVD load all files then the installation stall on a screen with...

I have an older system currently running Vista Home Premium x64. It is a Biostar K8NHA Grand nForce 3 250 chipset board, Athlon 64 3400+ (2.4Ghz) CPU, 2Gb ram, MSI GeForce 7600GT 512mb AGP video card, Maxtor 340Gb IDE HD and an NEC IDE DVD burner. Runs Vista x64 fine, only used connected to a TV...

hi guys, i need help. i am not sure it's windwos 7 problem or my configurations i tried to install windows 7 RC on the below setup (all new), but failed 1. SATA harddisk, WD Cavier 1T 2. mobo, Gigebyte GA-GM-785-S2H 3. SATA optical drive. LG-GGC... the last two components work fine if i...

I have a 300GB NTFS IDE secondary hard drive, and when i put RC 1 on my computer, it didnt recognize it. i switched back to my Vista 64bit and it is recognized again. Anybody know a solution to this?

I have a SATA Raid setup that I don't want to mess with. I added a seperate IDE hard drive that I am going to install Windows 7 on. I tried to install Windows with the IDE set up as a slave. This did not work. I then disconnected the SATA setup and set the IDE jumpers to master. The install is...

I had this problem with beta build 7077 and now with rc1. If I leave my computer for a while it will stop responding to my mouse clicks and key presses, but my mouse will still move. This used to only happen overnight, but now it's happening sometimes after a few hours. Sometimes if I hit...

I cannot find anyone with my exact issues on multiple forums. I successfully downloaded the legit RC, from Microsoft. burn to an image using the 7 beta iso burner. states successfully burned. Went to install and it Hung at the starting windows section. Did not get in to wipe drive or anything...

Hi, I installed first Windows XP in a IDE hard disk, then installed Windows 7 (7100) 64 Ultimate in a SATA hard disk. The Windows 7 and the dual booting were working perfectly. Today, I disconnected the IDE hard disk with the Windows XP and try to boot my computer only with the Windows 7 and...

Here are the system specs that I am running at 1. AMD Phenom 2 940 3GHz Quad Core processor AM2+ 2.Gigabyte GA-MA790GP-UD4H (not really sure that is what it says on the manual) 3. Ide Hard disk 250 gig (master) 4. Ide Cd Drive on (slave) - reason only one IDE slot 5. PC8400 Ram at 1033 MHz...

I've installed Windows 7 previously so I know my system works fine.. Biostar TA790gx 128 motherboard... sata hdd, both sata and ide burners. The only new thing is my video card, a Radeon HD 4650. It installs most, if not all the way, I left it alone today for 12 hours... I get back home and all...

I am having a very strange issue during the install. I recently got some new components. My old computer included 2 80GB drives in RAID-0 (SATA) for the OS and a 320GB for files. I decided to just split the two 80GB drives between two computers for the OS and put the 320GB in one for files and a...

Anyone else have this working? I installed it last time flawlessly but any time I tried to compile anything I got errors (and no it wasn't my code.) Was compiling C++ btw. Heres a update with the error I get. After compiling and trying to debug a hello world program. 1>------ Build started...

I'm trying to install Windows 7 32-bit build 7000 on a new computer I had just built. Now, this is not because I'm choosing to, but because I couldn't install Windows Vista Home Premium either. I had to settle for something. What happens is that my computer is booting regularly into the DVD...

So i played a bit of Dead Space on Win.7 32 bit the graphics run faster, smoother and even look a little better then on Vista for some reason using my low-end dx10 card Evga 8500GT Gpu-688 from 450 stock Mem-500 from 400 stock and the Shader-1800 from 918 stock with stock 20mm fan on card my...

I am having a really difficult time "renaming" or "labeling" hard disk drives (ide) and (sata) and (usb) When I right click the drive and choose rename, it does nothing after I type the new name in, I also have tried to go into Disk Management to label them, same efffect, does nothing. (also...

I have xp installed on a sata drive 0 Partition 0 I have vista installed on ide drive 0 I have mandriva installed on ide drive 1 The grub mbr is on sata drive 0 partition 0 and boots all three Boot Mandriva Boot Windows-XP Boot Windows-Vista Now I installed Win7 on sata drive 0 partition 1...

I having this error "Session3_initalizatin_failed". When I try ti Install Windows 7. Both Vista Ultimate X64 and XP X32 Work just fine. XP on IDE ATA and Vista on SATA. I have tryed W7 on both disks. Also tryed al of my DDR ram in difrent ways. 1 and 1, and more. total 4 pices of 1 Gb. Also...

Blue Screen of Death in random Hi everyone Tanks for a great forum with a lot of helpful answers!! I have a problem that I get the blue screen of death at different times and I can not find any system in it. The screen is saying someting with memory management". Some time it happens while...

Hi, i have a task to develop an IDE/ USb interface, for this purpose i am using a chip from texas instrument "tusb6250". can any one help me out regarding the application firmware or bootloader. can i get this from any website

Having a little problem with installing Vista. System spec 3.0 Wolfdale Dual Core EVGA 132-CK-NF78-A1 (780i Tri-SLI Board) Corsair 4g TWIN2X4096-6400C4DHX 4-4-4-12 timing 36gig WD Raptor 2 Segate Barricuda 750gig ST3750640AS XIGMATEK MC NRP-MC751 750W ATX12V PSU Input Voltage100 - 240 V...