Windows 7 Network Connection Tips (Router Reboots)

It appears that you have encountered network issues with your Windows 7 setup and have found some tips to address them. Let's break down the steps you've mentioned and provide some additional insights: 1. Disable Power Management for the Network Card: - Go to the network card properties by following these steps: - Right-click on the network connection icon in the system tray. - Select "Open Network and Sharing Center." - Click on "Change adapter settings." - Right-click on your network adapter and choose "Properties." - In the Properties window, navigate to the "Configure" option. - Click on "Power Management" and uncheck all the boxes. 2. Adjust Network Card Speed Setting: - Some network cards might have trouble negotiating speed correctly, especially in older operating systems like Windows 7. - To address this, you can change the speed setting by following these steps: - In the network card properties, locate the "Advanced" tab. - Look for the speed setting and change it from Auto or Auto Negotiate to a specific value like 100Mbps Full Duplex. - You can try different speed settings based on your network's capabilities. 3. Disable IPv6 Protocol: - Sometimes, network issues can arise due to compatibility problems with IPv6. - To disable IPv6, follow these steps: - Go to the network adapter settings. - Look for the properties related to Internet Protocol Version 6 (TCP/IPv6). - Uncheck the box next to IPv6 to disable it. These steps are known to help in resolving network connectivity issues in some cases. It's great to hear that implementing the initial tips resolved your NIC card dropping connections and prevented your router from rebooting every time you entered Sleep mode or restarted the computer. In case you encounter more network-related issues or need further assistance, feel free to reach out for additional support.