scruffy1
Well-Known Member
- Joined
- Jan 30, 2011
- Messages
- 38
- Thread Author
- #1
hi
i'm new to the forum, and seeking some assistance that other sources have failed to provide thus far - i'm far from a noob, and a keen overclocker, but only had win 7 up for several months, and this is a relatively recent issue without any new hardware changes, or setting adjustments
apart from the cpu (when the multi kicks up to 9 anyway), the rest of my rig runs at stock speed, although i have recently also overclocked the gpu for gaming, under good cooling and without any issue when playing - the cpu is under a thermalright ultra extreme, and the xfx has a thermalright v2 as demonstrated Link Removed
the weird part is that it only seems to have gone bad with embedded video, almost without doubt i can provoke a bluescreen by viewing Link Removed content, but gaming isn't even an issue
i had troubles in upgrading catalyst (that's hardly unique) and it seemed to be a problem using ati tool or the msi equivalent; oddly now though catalyst control centre seemed well behaved, and i can manually overclock the xfx in gaming to 920/1400 (and 60% manual fan) without problems, i note after the last bsod to gain a minidump and ran your tools that ccc has set the default speeds to 400/900 instead of the previous 157/300 or so fixed with a reboot
what's that all about ?
anyway, i digress..
i would love your thoughts on the situation
the memory memtests fine (10 runs overnight), the gpu does furmark benching without concerns, and it's too hot here to prime the cpu, but i am not too sure that is issue either - 5 cycles of LinX for a down 'n' dirty trial show zero errors
please, please, please make it go away...
many thx in anticipation of useful input
i'm new to the forum, and seeking some assistance that other sources have failed to provide thus far - i'm far from a noob, and a keen overclocker, but only had win 7 up for several months, and this is a relatively recent issue without any new hardware changes, or setting adjustments
apart from the cpu (when the multi kicks up to 9 anyway), the rest of my rig runs at stock speed, although i have recently also overclocked the gpu for gaming, under good cooling and without any issue when playing - the cpu is under a thermalright ultra extreme, and the xfx has a thermalright v2 as demonstrated Link Removed
the weird part is that it only seems to have gone bad with embedded video, almost without doubt i can provoke a bluescreen by viewing Link Removed content, but gaming isn't even an issue
i had troubles in upgrading catalyst (that's hardly unique) and it seemed to be a problem using ati tool or the msi equivalent; oddly now though catalyst control centre seemed well behaved, and i can manually overclock the xfx in gaming to 920/1400 (and 60% manual fan) without problems, i note after the last bsod to gain a minidump and ran your tools that ccc has set the default speeds to 400/900 instead of the previous 157/300 or so fixed with a reboot
what's that all about ?
anyway, i digress..
i would love your thoughts on the situation
the memory memtests fine (10 runs overnight), the gpu does furmark benching without concerns, and it's too hot here to prime the cpu, but i am not too sure that is issue either - 5 cycles of LinX for a down 'n' dirty trial show zero errors
please, please, please make it go away...
many thx in anticipation of useful input