kalipsonoin
New Member
- Joined
- Feb 22, 2011
- Messages
- 24
- Thread Author
- #1
[FONT="]My computer has been randomly BSODing for quite a while. Sometimes only once a week, sometimes every few days. I came on here a while ago and ended up changing the RAM settings but that didn't work.
Today a new problem has started. While playing LOTRO, the computer will randomly shut down. It has done this four times in the last few hours. Always only 5-10 minutes into the game. I updated the BIOS but that didn't help. It has crashed once since I did that. I wasn't even doing anything - the game was running, but I wasn't even near the computer. When it shuts down, the monitor receives no signal, but the computer is continuing to run (lights and fan on). Upon restart, it says "Overclocking failed". Setting the BIOS to defaults did not fix the problem.
I had posted this before but somehow missed a reply and gave up for a while because I was mainly using another computer. (I'm sorry, that was a big mistake on my part)
Check disk always comes up fine. So does scannow.
Any suggestions would be excessively appreciated. And thanks in advance.
[/FONT]
[FONT="]
[/FONT]
Today a new problem has started. While playing LOTRO, the computer will randomly shut down. It has done this four times in the last few hours. Always only 5-10 minutes into the game. I updated the BIOS but that didn't help. It has crashed once since I did that. I wasn't even doing anything - the game was running, but I wasn't even near the computer. When it shuts down, the monitor receives no signal, but the computer is continuing to run (lights and fan on). Upon restart, it says "Overclocking failed". Setting the BIOS to defaults did not fix the problem.
I had posted this before but somehow missed a reply and gave up for a while because I was mainly using another computer. (I'm sorry, that was a big mistake on my part)
Check disk always comes up fine. So does scannow.
Any suggestions would be excessively appreciated. And thanks in advance.
[/FONT]
[FONT="]
Code:
RAMMon v1.0 Build: 1002 built with SysInfo v1.0 Build: 1006
Memory Summary[/FONT][/B]
[FONT="]Number of Memory Devices: 2 Total Physical Memory: 4095 MB (4096 MB)
Total Available Physical Memory: 2618 MB
Memory Load: 36% [/FONT]
[CENTER][CENTER][B][FONT="]Item[/FONT][/B][/CENTER]
[/CENTER]
[CENTER][CENTER][B][FONT="]Slot #1[/FONT][/B][/CENTER]
[/CENTER]
[CENTER][CENTER][B][FONT="]Slot #2[/FONT][/B][/CENTER]
[/CENTER]
[CENTER][CENTER][B][FONT="]Slot #3[/FONT][/B][/CENTER]
[/CENTER]
[CENTER][CENTER][B][FONT="]Slot #4[/FONT][/B][/CENTER]
[/CENTER]
[FONT="]Ram Type [/FONT]
[FONT="]DDR3 [/FONT]
[FONT="]DDR3 [/FONT]
[FONT="]Not Populated [/FONT]
[FONT="]Not Populated [/FONT]
[FONT="]Standard Name [/FONT]
[FONT="]DDR3-1333 [/FONT]
[FONT="]DDR3-1333 [/FONT]
[FONT="]Module Name [/FONT]
[FONT="]PC3-10600 [/FONT]
[FONT="]PC3-10600 [/FONT]
[FONT="]Memory Capacity (MB) [/FONT]
[FONT="]2048 [/FONT]
[FONT="]2048 [/FONT]
[FONT="]Bus Clockspeed (Mhz) [/FONT]
[FONT="]666.67 [/FONT]
[FONT="]666.67 [/FONT]
[FONT="]Jedec Manufacture Name [/FONT]
[FONT="]G Skill Intl [/FONT]
[FONT="]G Skill Intl [/FONT]
[FONT="]Search Amazon.com [/FONT]
[FONT="]Search! [/FONT]
[FONT="]Search! [/FONT]
[FONT="]SPD Revision [/FONT]
[FONT="]1.0 [/FONT]
[FONT="]1.0 [/FONT]
[FONT="]Registered [/FONT]
[FONT="]No [/FONT]
[FONT="]No [/FONT]
[FONT="]ECC [/FONT]
[FONT="]No [/FONT]
[FONT="]No [/FONT]
[FONT="]DIMM Slot # [/FONT]
[FONT="]1 [/FONT]
[FONT="]2 [/FONT]
[FONT="]Manufactured [/FONT]
[FONT="]Year 2000 [/FONT]
[FONT="]Year 2000 [/FONT]
[FONT="]Module Part # [/FONT]
[FONT="]F3-12800CL9-2GBRL [/FONT]
[FONT="]F3-12800CL9-2GBRL [/FONT]
[FONT="]Module Revision [/FONT]
[FONT="]0x0 [/FONT]
[FONT="]0x0 [/FONT]
[FONT="]Module Serial # [/FONT]
[FONT="]0x0 [/FONT]
[FONT="]0x0 [/FONT]
[FONT="]Module Manufacturing Location [/FONT]
[FONT="]0 [/FONT]
[FONT="]0 [/FONT]
[FONT="]# of Row Addressing Bits [/FONT]
[FONT="]14 [/FONT]
[FONT="]14 [/FONT]
[FONT="]# of Column Addressing Bits [/FONT]
[FONT="]10 [/FONT]
[FONT="]10 [/FONT]
[FONT="]# of Banks [/FONT]
[FONT="]8 [/FONT]
[FONT="]8 [/FONT]
[FONT="]# of Ranks [/FONT]
[FONT="]2 [/FONT]
[FONT="]2 [/FONT]
[FONT="]Device Width in Bits [/FONT]
[FONT="]8 [/FONT]
[FONT="]8 [/FONT]
[FONT="]Bus Width in Bits [/FONT]
[FONT="]64 [/FONT]
[FONT="]64 [/FONT]
[FONT="]Module Voltage [/FONT]
[FONT="]1.5V [/FONT]
[FONT="]1.5V [/FONT]
[FONT="]CAS Latencies Supported [/FONT]
[FONT="]6 7 8 9 [/FONT]
[FONT="]6 7 8 9 [/FONT]
[FONT="]Timings @ Max Frequency [/FONT]
[FONT="]9-9-9-24 [/FONT]
[FONT="]9-9-9-24 [/FONT]
[FONT="]Minimum Clock Cycle Time, tCK (ns) [/FONT]
[FONT="]1.500 [/FONT]
[FONT="]1.500 [/FONT]
[FONT="]Minimum CAS Latency Time, tAA (ns) [/FONT]
[FONT="]13.125 [/FONT]
[FONT="]13.125 [/FONT]
[FONT="]Minimum RAS to CAS Delay, tRCD (ns) [/FONT]
[FONT="]13.125 [/FONT]
[FONT="]13.125 [/FONT]
[FONT="]Minimum Row Precharge Time, tRP (ns) [/FONT]
[FONT="]13.125 [/FONT]
[FONT="]13.125 [/FONT]
[FONT="]Minimum Active to Precharge Time, tRAS (ns) [/FONT]
[FONT="]36.000 [/FONT]
[FONT="]36.000 [/FONT]
[FONT="]Minimum Row Active to Row Active Delay, tRRD (ns) [/FONT]
[FONT="]6.000 [/FONT]
[FONT="]6.000 [/FONT]
[FONT="]Minimum Auto-Refresh to Active/Auto-Refresh Time, tRC (ns) [/FONT]
[FONT="]49.500 [/FONT]
[FONT="]49.500 [/FONT]
[FONT="]Minimum Auto-Refresh to Active/Auto-Refresh Command Period, tRFC (ns) [/FONT]
[FONT="]110.000 [/FONT]
[FONT="]110.000 [/FONT]
[FONT="]DDR3 Specific SPD Attributes [/FONT]
[FONT="]Write Recovery Time, tWR (ns) [/FONT]
[FONT="]15.000 [/FONT]
[FONT="]15.000 [/FONT]
[FONT="]Internal Write to Read Command Delay, tWTR (ns) [/FONT]
[FONT="]7.500 [/FONT]
[FONT="]7.500 [/FONT]
[FONT="]Internal Read to Precharge Command Delay, tRTP (ns) [/FONT]
[FONT="]7.500 [/FONT]
[FONT="]7.500 [/FONT]
[FONT="]Minimum Four Activate Window Delay, tFAW (ns) [/FONT]
[FONT="]30.000 [/FONT]
[FONT="]30.000 [/FONT]
[FONT="]RZQ / 6 Supported [/FONT]
[FONT="]Yes [/FONT]
[FONT="]Yes [/FONT]
[FONT="]RZQ / 7 Supported [/FONT]
[FONT="]Yes [/FONT]
[FONT="]Yes [/FONT]
[FONT="]DLL-Off Mode Supported [/FONT]
[FONT="]Yes [/FONT]
[FONT="]Yes [/FONT]
[FONT="]Maximum Operating Temperature (C) [/FONT]
[FONT="]95 [/FONT]
[FONT="]95 [/FONT]
[FONT="]Refresh Rate at Extended Operating Temperature Range [/FONT]
[FONT="]1X [/FONT]
[FONT="]1X [/FONT]
[FONT="]Auto-self Refresh Supported [/FONT]
[FONT="]No [/FONT]
[FONT="]No [/FONT]
[FONT="]On-die Thermal Sensor Readout Supported [/FONT]
[FONT="]No [/FONT]
[FONT="]No [/FONT]
[FONT="]Partial Array Self Refresh Supported [/FONT]
[FONT="]Yes [/FONT]
[FONT="]Yes [/FONT]
[FONT="]Thermal Sensor Present [/FONT]
[FONT="]No [/FONT]
[FONT="]No [/FONT]
[FONT="]Non-standard SDRAM Type [/FONT]
[FONT="]Standard Monolithic [/FONT]
[FONT="]Standard Monolithic [/FONT]
[FONT="]Module Type [/FONT]
[FONT="]UDIMM [/FONT]
[FONT="]UDIMM [/FONT]
[FONT="]Module Height (mm) [/FONT]
[FONT="]30 [/FONT]
[FONT="]30 [/FONT]
[FONT="]Module Thickness (front), (mm) [/FONT]
[FONT="]2 [/FONT]
[FONT="]2 [/FONT]
[FONT="]Module Thickness (back), (mm) [/FONT]
[FONT="]2 [/FONT]
[FONT="]2 [/FONT]
[FONT="]Module Width (mm) [/FONT]
[FONT="]133.5 [/FONT]
[FONT="]133.5 [/FONT]
[FONT="]Reference Raw Card Used [/FONT]
[FONT="]Raw Card B Rev. 0 [/FONT]
[FONT="]Raw Card B Rev. 0 [/FONT]
[FONT="]DRAM Manufacture ID [/FONT]
[FONT="]1229 [/FONT]
[FONT="]1229 [/FONT]
[FONT="]# of DRAM Rows [/FONT]
[FONT="]0 [/FONT]
[FONT="]0 [/FONT]
[FONT="]# of Registers [/FONT]
[FONT="]0 [/FONT]
[FONT="]0 [/FONT]
[FONT="]Register Manufacturer [/FONT]
[FONT="]Register Type [/FONT]
[FONT="]Register Revision [/FONT]
[FONT="]0 [/FONT]
[FONT="]0 [/FONT]
[FONT="]XMP Attributes [/FONT]
[FONT="]XMP Revision [/FONT]
[FONT="]0.0 [/FONT]
[FONT="]0.0 [/FONT]
[FONT="]Enthusiast / Certified Profile [/FONT]
[FONT="]Module voltage [/FONT]
[FONT="]1.50V [/FONT]
[FONT="]1.50V [/FONT]
[FONT="]Clock speed (Mhz) [/FONT]
[FONT="]800.00 [/FONT]
[FONT="]800.00 [/FONT]
[FONT="]Minimum clock cycle time, tCK (ns) [/FONT]
[FONT="]1.250 [/FONT]
[FONT="]1.250 [/FONT]
[FONT="]Supported CAS latencies [/FONT]
[FONT="]9 [/FONT]
[FONT="]9 [/FONT]
[FONT="]Minimum CAS latency time, tAA (ns) [/FONT]
[FONT="]11.000 [/FONT]
[FONT="]11.000 [/FONT]
[FONT="]Minimum RAS to CAS delay time, tRCD (ns) [/FONT]
[FONT="]11.000 [/FONT]
[FONT="]11.000 [/FONT]
[FONT="]Minimum row precharge time, tRP (ns) [/FONT]
[FONT="]11.000 [/FONT]
[FONT="]11.000 [/FONT]
[FONT="]Minimum active to precharge time, tRAS (ns) [/FONT]
[FONT="]30.000 [/FONT]
[FONT="]30.000 [/FONT]
[FONT="]Supported timing at highest clock speed [/FONT]
[FONT="]9-9-9-24 [/FONT]
[FONT="]9-9-9-24 [/FONT]
[FONT="]Minimum Row Active to Row Active Delay, tRRD (ns) [/FONT]
[FONT="]6.000 [/FONT]
[FONT="]6.000 [/FONT]
[FONT="]Minimum Active to Auto-Refresh Delay, tRC (ns) [/FONT]
[FONT="]49.000 [/FONT]
[FONT="]49.000 [/FONT]
[FONT="]Minimum Recovery Delay, tRFC (ns) [/FONT]
[FONT="]110.000 [/FONT]
[FONT="]110.000 [/FONT]
[FONT="]Minimum Write Recovery time, tWR (ns) [/FONT]
[FONT="]15.000 [/FONT]
[FONT="]15.000 [/FONT]
[FONT="]Minimum Write to Read CMD Delay, tWTR (ns) [/FONT]
[FONT="]7.500 [/FONT]
[FONT="]7.500 [/FONT]
[FONT="]Minimum Read to Pre-charge CMD Delay, tRTP (ns) [/FONT]
[FONT="]7.500 [/FONT]
[FONT="]7.500 [/FONT]
[FONT="]Minimum Four Activate Window Delay, tFAW (ns) [/FONT]
[FONT="]62.000 [/FONT]
[FONT="]62.000 [/FONT]
[FONT="]Maximum Average Periodic Refresh Interval, tREFI (us) [/FONT]
[FONT="]7.750 [/FONT]
[FONT="]7.750 [/FONT]
[FONT="]Write to Read CMD Turn-around Time Optimizations [/FONT]
[FONT="]No adjustment [/FONT]
[FONT="]No adjustment [/FONT]
[FONT="]Read to Write CMD Turn-around Time Optimizations [/FONT]
[FONT="]No adjustment [/FONT]
[FONT="]No adjustment [/FONT]
[FONT="]Back 2 Back CMD Turn-around Time Optimizations [/FONT]
[FONT="]No adjustment [/FONT]
[FONT="]No adjustment [/FONT]
[FONT="]System CMD Rate Mode [/FONT]
[FONT="]2T [/FONT]
[FONT="]2T
Last edited by a moderator: