partitioning

Hi everyone, I have two HDDs one is 640GB & the other is 320GB(Both MBR using Legacy boot). The 640GB HDD has Windows 7(in D)& Windows 10(in C) installed but the boot manager is located in the 320GB HDD. I want to move the boot manager to the 640GB HDD. My Partitions look like this...

HI, Recently I took the 2.5" SSD off from my Windows notebook, formatted it and installed MACOSX to use it on. a Mac temporarily. Some time later I bought a NVMe M.2 SSD to upgrade the MAC and a M.2 SSD to upgrade the Windows notebook. As the Windows notebook accepts two 2.5" SATA SSDs, I...

Hello, I haven’t used my laptop for long time and when opened the os won’t boot up and tried to repair it says can’t be repaired. I used dell recovery tool to get a iso file and made a bootable usb stick. When tried to install Iget the efi system is formatted to ntfs format please format to...

I had a issues when I was downloading Windows 10 lot core to my raspberry pi 3 B+.I used a software called "Install Windows 10 Lot Core Dashboard" and it took part of my c: drive and made a UDF partition. I had a heck of a time trying to figure out how to remove it. But now i am left with my C...

I have new 8tb external hard drive need use data recovery . I used Rufus to install windows to go. Rufus set maximum size to 2tb. now I want to format the drive back to 8tb. When use Windows format, it can get 2tb. how to solve this issue?

I have a (new) Acer Swift notebook which does not allow to switch/enable Legacy BIOS mode. So I can only disable "Secure Boot" and use UEFI. However my bootable, GPT and NTFS formatted USB flash drive is NOT recognized or even bootable. It works on other computers. I read that FAT32 should be...

I'm on Windows 10 Home, using USB 3.0 EXT HDD (one Glyph & one Fantom) The Problem: I attempted to clone each drive using Macrium Reflect as I've done many times before to back up information. Something's up because both drives seem to be bricked. At the moment that is. If you look disk.jpg...

Could you please tell me why disc 0 shows as partition(2) and if it should be fixed, how to do so? I do have an image I can recover if necessary. Thank you

Hi! I am in a shit siutation: I wanted to create a recovery drive. I plugged in an external drive with an M and an N Partition. Once i started the wizard, it told me to use either the M or the N drive. I took M, since on N there was the backup of quite a lot of pictures. Then the process to...

i want format my pc and install win server 2008 but the case have 4 hards any hard 300 GB ,so how can i divide them and create drive c and drive d

I used "AOMEI partition assistant" to shrink a partition, during this "Memory Dump" appeared, when I restarted the PC I found that this partition became locked, I deleted it, and it became free space... 1 - When I try to create a partition in that free space: -It says "not enough space"... 2...

Hi All, I migrated my OS/image from a stock HDD to a new SSD. I can boot from the SSD completely fine when the HDD is not connected but when it is connected I get a boot error. I can boot from the SSD using the boot options in the BIOS (Dell) but the boot priority is still set to Windows Boot...

I have a fixed-size partition C for my Windows 7 (I've given it almost 100 GBs and I don't download anything or leave it on C. I have Linux installed as well) and It's coming closer and close to being full. I'd like to hear your suggestions/advice on how you guys deal with this issue/problem?

My win10 machine wouldn't boot. I tried system restore but it failed. Three or four restore points to go back to and none of them succeeded. I ran Kyhi's usb and found macrium on it. I thought I had a macrium image so I ran it. The Macrium image wouldn't restore. 'read failed 22 invalid...

Hi guys, I need some help. My laptop currently can’t boot any system. I will describe the order of actions which provoked the problem: 1. Win 10 installation 2. Drivers installation with Lenovo support web site 3. It was necessary to completely format the disk (ssd), there was only a USB...

I had a SSD installed in my computer with the OS on it. This SSD became to small so I bought a 500Gb SSD. I made a backup of the SSD with the OS en put that at the new SSD. But now there are two partitions at this SSD, one with same capicity as the old one and an empty one with a different...

I reinstalled window 7 on a computer that was having issues. I deleted the existing Windows partition/drive and ran the install to that Drive (c). After getting everything reinstalled I was going to image the C Drive. It appears to be linked to another large drive (3tb). That drive didnt show up...

I got myself a Silicon Image 3114 SATA Controller which is capable of RAIDing two discs. I have two SSD sporting approx. 230 GB each. I wanted to enable RAID 0 (striping) to have one "virtual" drive of 450 GB. I followed the steps below: Installed the 3114 PCI card on my board. Connected the...

SO I used Kali Linux live usb, and I thought live usb would not erase windows but it did. I need help and any solution by which I can use Kali Linux as a live usb and not getting Windows wiped out. Thanks!

Hi! i want to make an iso image file from my Vista system but only the operating system + drivers, i don't want any of my programs files and personnel files! i tested a few softwares but the only choice i have is the complete "C" drive! How i can do that? i want a copy for trying my Vista...