raid

I am getting ready to re-install Win7-64 to my two HDD's that are in RAID 0. I have done this one time before, but recall that the drivers can be confusing. There are some Intel RST drivers on the Asus website, version 11.something and on the Intel site there are version 12.something. Which...

A problem that has been haunting me ever since I installed my current motherboard (ASRock 890FX Deluxe 4) is that my two external drives, contained in a Startech ESATCASE2, which connects to a SI RAID controller card (can't remember the model at the moment), causes the BIOS to hang on the last...

Hello all, I'm new around here and I've got a problem with my networking. Relevant Hardware: Asus Sabertooth (first verson) 990FX Maim board. 2x WD 7200RPM HDs Windows 7 Ult x64 Background: I install 2 disk hard drives into my computer to set them up into a Raid 0. Now I got them installed...

Laptop Model Sony Vaio SVT13113EN 500GB HardDrive + 32 GB SSD SATA Mode set to RAID When i tried a clean install of windows 7 (Home premium) the installation setup couldn't detect my drive and I tried loading drivers from flash drive manually got the message "No signed drivers found....."...

Sup guys, I actually have a double whammy for you, first off, My Devices and printers isen't showing my icons properly, how can I fix this? Second off, My Computer ALWAYS tries to boot from the Disk drive. I have EVERYTHING but the Hard drives Disabled, but it still tries to to boot from there...

I have had this issue for a few months now (around November) and I have tried almost everything i can possibly think of to try and resolve it, but to no avail. I have replaced almost every piece of hardware in my PC except RAM and Hard drive itself (under warranty), did a system recovery to...

Hi, This is my system: win7 prof 64bit installed. Motherboard: Asus P8H67 CPU Sockel: LGA1155 RAM: 8 GB Intel-RAID-Controller RAID1 configured with two 2TB HDDs Single 2TB HDD (or additional backups) The Win Instalation resides on a RAID1 partition (100GB). My new SSD ist a Samsung...

Sorry, if this should be in the hardware forum... I am doing a fresh (bare metal) install. I am experiencing a weird problem with Win7 not remembering drive letter. I am hoping that someone has run across this problem and has the answer. I tried "Diskpart automount enable". It did not work...

GIGABYTE - Motherboard - Socket 1155 - GA-P61-S3 (rev. 2.0) Ive installed the rest of the drivers provided by manufacturer except the SATA RAID/AHCI ones.The Intel Rapid Storage Technology gave me an error that I dont meet the system requirements so I no longer insisted with the others...

Anybody else seen this behavior? Why would changing a SATA controller to a different mode (AHCI to RAID) cause Windows to become deactivated? No Hard Drive changes were made. I will give it some time to see if it comes back, but this is strange. I do have Media Center installed, possibly the...

I suspect it may be the 2/3rd HDDs. They are Samsung 204UI rain in RAID 0 and seem be slow to detect after a crash. See dumps & files. Link Removed

Hello everyone and Link Removed to Windows 8 Forums. In cooperation with Mike (special thanks), Windows 8 Forums and courtesy of Aomei Partition Software/Aomei Technology. Link Removed I have 13 Activation Licenses available to Give Away. Link Removed Link RemovedPowerful and Complete Disk...

Yesterday i got my new gpu (Msi Geforce Gtx 680) psu (Corsair AX 750W) and ssd (Samsung SSD 830 Series 128GB 2.5 OEM) My question is, how do i complete the ssd installation, it says Install As Primary or Install As Raid, i allready know that i have to install as primary, then it tells me to...

Hi! I often get a BSOD of [system_service_exception] 0x0000003B . I use HD 6870 before have a same BSOD.I though it was video card hardware or ATI driver issue. ( I did use DriverSweeper to uninstall the driver and update a new ATI driver still no luck.) So I took the vidoe card out and replace...

BSOD happens frequently either during high load (gameing, video editing etc...) or when a USB device is plugged in. I'm about to buy a new mobo because of this.... thoughts? Ram has been stress tested in another computer and passes fine. but fails on mine. (memtest86+) -AMD Phenom II X6 1090T...

Hello, I will try to be as detailed about my problem as possible. While browsing using Chrome I received frequent recurring unresponsive warnings, followed by screen corruption/artifacting, followed by my first BSod (In 7). Attached to this post is a screenshot of the DMB File as detected by...

Have just today wiped my RAID 0 array and secure erased both my OCZ agilty 3 SSD's, decided to not run in RAID again (kinda unstablke at times) so have reinstalled Windows 7 64-bit on a single SSD (only had one hooked up during install to prevent windows 7 install partitions getting split...

hello i have 2 identical 320gb drives that i want to raid 0 to combine them to a 640 gb drive that has windows 7 installed on. Im not worried about data loss or anything like that. I have an ASrock 990fx extreme 3 board. could really use peoples advice who is RAID knowledgeable.

Instinctively, you may believe that it is necessary to install drivers for your components, once you have Windows 8 up and running. This may not be the case, however, and historically has not been. If your device, whether it be a PCI card, a USB device, or even something connected to a serial...

What is going on here? Total madness? Link Removed Link Removed First, please let me apologize for the mass of wires, general techno geek junk, and other no-no’s like a can of diet Pepsi right next to my StarTech 4-port USB3 drive bay. Once I did some extensive reading about Storage...